Huatao Technical News

Separate Machine for LH and RH Screw Flights?

Date Issued:2026-11-10

Do I Need a Separate Machine for Left-Hand and Right-Hand Screw Flights?

Usually no. One machine can often produce both LH and RH flights if feed direction, guide settings, tooling or CNC program can be changed. Cold rolling may need different roll setup; winding is more flexible. Confirm by forming samples in both directions and checking helix angle, pitch and diameter.

What Changes Between LH and RH?

The flight helix direction is reversed. A Spiral Blade Forming Machine must be set correctly for feed direction and guide angle. Some machines use the same tooling with a program change; others need different rolls or guides.

Machine-Type Differences

A Continuous Screw Flight Cold Rolling Machine is often product-specific because roll profile and feed path control the flight. A Winding Spiral Blade Forming Machine can be more flexible through programmable motion and adjustable guides.

Related Screw Components

Check Plug Screw Feeder Shaft and Plug Screw Feeder For MDF when specifying flight direction. The flight must match the screw conveyor or feeder design; a mirror flight is not interchangeable.

Buyer Data

Provide flight OD, ID, pitch, direction, strip width, thickness, material grade, tolerance, annual quantity and target changeover time. Ask whether the supplier can demonstrate both LH and RH forming before shipment.

Contact: Lucy Chai | Lucy.chai@huataogroup.com | www.refinerdisc.com | WhatsApp: +86 15373883537

 #ScrewFlight #SpiralBlade #MetalForming #HUATAO #Drilling #TMRMIXER #Sandwasher #auger #screw #screwconveyor #feedmixer

 
* E-mail :

can not be empty

* Question :

can not be empty

Related News