NEWS

Which Hydraulic Press Is Suitable for Forming Large-Diameter Screw Flights?

Date Issued:2026-11-18

For manufacturers producing large-diameter screw conveyor flights, choosing a suitable hydraulic press is a technical decision involving more than the maximum outer diameter. The plate thickness, inner diameter, pitch, material and required production range all affect the machine configuration.

A hydraulic single-piece flights screw forming machine is an appropriate option when the required product is an individual spiral blade rather than a continuous rolled flight. The HT240, HT280 and HT330 are the main large-format models to consider.

Hydraulic Pressing for Individual Screw Flights

A single-piece hydraulic forming machine uses a matched mold to press prepared metal material into a spiral blade. It is different from continuous rolling, where a strip is formed into a continuous flight.

For manufacturers comparing these methods, the spiral blade forming machine is the relevant starting point for individual blade pressing. A continuous screw flight cold rolling machine serves a different production route. The winding spiral blade forming machine is another option for continuous spiral blade production.

The machine type should match the product structure and manufacturing process.

Comparing the Large-Format Press Models

The HT240 is listed for outer diameters below 1,200 mm, plate thicknesses from 2–35 mm and pitch from 180–1,000 mm. Its hydraulic pressure is 120 tons at 20 MPa.

The HT280 increases the listed outer diameter range to below 1,600 mm and the thickness range to 2–40 mm. Its pitch range is 240–900 mm, with 180 tons of hydraulic pressure at 20 MPa.

The HT330 is designed for the largest listed product range in this series. Its catalogue data gives an outer diameter below 2,400 mm, thickness from 2–50 mm and pitch from 240–900 mm. The hydraulic pressure is 260 tons at 20 MPa.

These values are reference limits from the machine catalogue. They do not mean that all maximum dimensions can be achieved simultaneously. The supplier should review the drawing and material before confirming the final configuration.

Material and Mold Configuration

The product information identifies carbon steel, 304 stainless steel, 201 stainless steel and HARDOX as materials used in screw blade production.

Different material grades and thicknesses may require different forming considerations. A machine suitable for a carbon steel flight should not automatically be assumed suitable for every stainless steel or wear-resistant steel specification.

The mold must also match the finished flight dimensions. Buyers should confirm outer diameter, inner diameter, pitch and any special features before the tooling arrangement is finalized.

Customization Based on the Customer's Product

A manufacturer producing several screw flight sizes needs to consider the full range of products planned for the machine.

The equipment can be selected and customized according to the customer's blade size and material. This allows the machine configuration to be evaluated against the actual manufacturing requirements rather than relying on a general-purpose specification.

For an accurate assessment, provide the smallest and largest flight dimensions, plate thickness, material grade, pitch and expected output. Drawings are preferred, but clear photos and measurements can also help begin the evaluation.

Service Life and Replacement Parts

The machine is supplied with a one-year warranty. The product information provided indicates that the machine's service life can reach approximately 7–8 years under suitable operation and maintenance.

Another practical advantage is the limited number of wearing parts. There are very few routine wear components, and replacement parts are inexpensive and easy to change. This can make maintenance more straightforward for workshops that operate the machine regularly.

Actual service life and maintenance frequency depend on operating conditions, usage intensity and maintenance practices.

Which Model Should You Choose?

For an outer diameter below 1,200 mm, the HT240 can be considered if the other dimensions and material are within its working range.

For requirements approaching 1,600 mm, the HT280 is a model to evaluate.

For the largest listed diameter range, below 2,400 mm, the HT330 is the primary model to review.

However, these are starting points rather than automatic recommendations. The final choice should be confirmed through a review of the complete flight specification.

Send your flights material and required dimensions to discuss a suitable single-piece flight screw forming machine.

Contact
Lucy Chai 
Email:Lucy.chai@huataogroup.com 
WhatsApp: +86 15373883537
www.refinerdisc.com

* E-mail :

can not be empty

* Question :

can not be empty

Related News