NEWS

What Specifications Should I Check Before Purchasing a Sectional Screw Flight Forming Machine?

Date Issued:2026-11-18

When purchasing a screw flight forming machine, buyers need to consider more than the maximum diameter or the machine's hydraulic pressure. The equipment must match the actual dimensions and material of the screw flights they intend to manufacture.

For screw conveyor manufacturers, auger producers and industrial component suppliers, preparing a complete engineering drawing can take time. The good news is that a complete drawing is not required for the initial selection of our single-piece hydraulic screw flight forming machine.

We only need five basic specifications to evaluate a suitable model: inner diameter, outer diameter, thickness, material and pitch.

1. Inner Diameter (ID): Check the Center Opening

The inner diameter is the opening at the center of the finished spiral blade. It determines how the flight fits onto the screw shaft or tube.

When requesting a machine recommendation, provide the finished flight ID. Different models have different minimum ID ranges, so this dimension needs to be checked against the machine's working range and mould configuration.

2. Outer Diameter (OD): Define the Finished Flight Size

The outer diameter determines the overall size of the spiral blade.

The machine brochure includes models from HT120 to HT330. The HT240 has a listed OD range below 1200 mm, the HT280 below 1600 mm, and the HT330 below 2400 mm.

These figures help identify the appropriate model range. However, maximum OD should never be considered separately from thickness, ID, pitch and material.

For more details, see our Spiral Blade Forming Machine product page.

3. Thickness: Confirm the Plate Range

Thickness is one of the most important factors in selecting a hydraulic forming machine.

The brochure lists different thickness ranges for each model. The HT240 is listed for 2–35 mm, the HT280 for 2–40 mm and the HT330 for 2–50 mm.

The correct model depends on the actual thickness and the material being formed. A maximum thickness figure alone does not confirm that every diameter and pitch combination is achievable.

Provide the thickness you use most frequently, as well as any thicker or thinner materials you plan to process.

4. Material: Identify the Steel Grade

Material affects the forming requirements and should be confirmed before the machine configuration is finalized.

The machine brochure identifies several materials:

  • Carbon steel

  • 304 stainless steel

  • 201 stainless steel

  • HARDOX steel

If your production involves different material grades, include all of them in your enquiry. We can then evaluate the machine according to your actual material range.

5. Pitch: Specify the Spiral Spacing

Pitch is the axial distance between corresponding points on adjacent turns of a screw flight.

It is an essential part of the finished flight geometry. Different machine models have different pitch ranges. For example, the HT240 lists 180–1000 mm, while the HT280 and HT330 list 240–900 mm.

The pitch must be reviewed together with the other four specifications to determine the appropriate machine.

6. Do You Need a Complete Engineering Drawing?

No—not for the initial machine selection.

Simply provide:

  • ID: Inner diameter

  • OD: Outer diameter

  • Thickness: Plate thickness

  • Material: Steel grade

  • Pitch: Required spiral spacing

With these five details, our team can evaluate the suitable machine model and discuss customization according to your flight dimensions and material.

A drawing or sample can be useful for later confirmation if your product includes special profiles or non-standard details. But you do not need to prepare a complete drawing just to start an enquiry.

7. Make Sure the Machine Uses the Correct Forming Process

The machine discussed here is a single-piece hydraulic flights screw forming machine. It uses hydraulic pressing to form individual spiral blade sections.

It is different from a continuous cold-rolling machine, which forms continuous flights through a rolling process. If your production requires continuous flighting, review our Continuous Screw Flight Cold Rolling Machine.

A winding machine is another separate equipment category with a different forming method. More information is available on our Winding Spiral Blade Forming Machine page.

The machine type should match the product you intend to manufacture.

8. Check Warranty, Service Life and Replacement Parts

A machine's long-term operating cost is also important when comparing suppliers.

Our machine comes with a one-year warranty. Under suitable operating and maintenance conditions, its expected service life can reach approximately 7–8 years.

It also has very few wearing parts. Replacement parts are inexpensive and easy to change, helping simplify maintenance and reduce the difficulty of routine servicing.

Actual service life depends on operating frequency, working conditions and maintenance practices.

Frequently Asked Questions

Can I purchase a screw flight forming machine without providing a drawing?

Yes. Five basic details—ID, OD, thickness, material and pitch—are enough for initial model selection.

Can the machine process stainless steel and HARDOX?

The brochure lists 304 stainless steel, 201 stainless steel and HARDOX steel, in addition to carbon steel. Confirm the exact grade and dimensions for your application.

Can the machine be customized for different flight sizes?

Yes. The machine can be selected or customized according to the required flight dimensions and material.

How long is the warranty?

The machine is supplied with a one-year warranty.

What is the expected service life?

It can reach approximately 7–8 years under suitable operating and maintenance conditions.

Get Your Machine Model Recommendation

You do not need a complete drawing to start.

Send us the inner diameter, outer diameter, thickness, material and pitch of your screw flights. Our team can evaluate the suitable single-piece hydraulic forming machine and discuss the configuration for your production.

Contact
Lucy Chai 
Email:Lucy.chai@huataogroup.com 
WhatsApp: +86 15373883537
www.refinerdisc.com

* E-mail :

can not be empty

* Question :

can not be empty

Related News